| Customization: | Available |
|---|---|
| Certification: | CE, GMP, ISO, CE, ISO |
| Condition: | New |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description
The machine is an intermittent motion and hole plate type filling fully automatic capsule filling equipment. It adopt optimization design combined the characteristics of Chinese medicine and the requirement of GMP, it has the characteristics of compact mechanism, small volume, lower noise, precision filling dosage, multi-function, running stably etc. It can finish the following motion at same time: capsule feeding, capsule separating, powder filling, capsule rejecting, capsule locking, finished capsule discharge and module cleaning etc. This machine is designed for meet the volume-produce on the basis of model NJP-1200 automatic capsule filling machine. it increase the lifting mechanism that easy to clean. It saves the cost and manpower for the enterprise that need volume-produce.
Main Features:
It has been improved the inner design turret ,and imports beeline bearings for each machine from Japan directly .so that it can be sure longer usage-life and precision of machine
The working station can runs under the good lubricating condition ,and maintains the inner lubrication of cam slot to a full extent ,increasing the pressure pulverization oil pump ,thus extends the operation life of the spare parts.
It is controlled by the computer has a step less timing with the frequency-conversion ,the numeral showing makes an easy operation and clear appearance .
The multi-bore dosing brings a precision dosage ( it is controlled around + 3.5%);The capsule qualified rate is higher then 99%.it can be filled with the Chinese traditional medicine and the Western medicine
It has a protector equipment for the operator and the machine .It has and automatic pause equipment when it is lack for the material ,It has a steady and safe working, It is the best choice for the hard capsule made factories.
| Equipment model, specification | NJP-7500 | |
| Technical Data |
Machine weight | 3800kg |
| Dimensions | 1700×1220×2150mm | |
| Motor Power | 13.5kw | |
| Power Supply | Three-phase four-wire AC 380V;50Hz | |
| Maximum production capacity | 7500 capsules/min | |
| Fillable capsule number | 00#~5# and Safety capsule A~E | |
| Capsule probability | ≥99.5% | |
| Noise | ≤75dBA | |
| Load difference | Above 300mg ≤±3% (filling of granules from 40 to 80 mesh after granulation) |
|
| Compressed air | 0.06m3/min 0.3Mpa | |
| Water source requirement | The water ring vacuum pump is equipped with a water tank for recycling, and can also be connected to an external water source. | |
| Vacuum degree | -0.02~-0.06 MPa | |
| Water flow | 250L/h | |
| Inlet pipe inner diameter | 20mm | |
| Drain pipe inner diameter | 27mm | |
| Working temperature | 21ºC±3ºC | |
| Working plant height requirement | Artificial feeding≥2.6m,Vacuum feeding≥2.8m | |
| Working environment relative humidity | 40~55% | |
| Exhaust volume | 300m3/h | |
| Special function | The pellet filling device can be added; the powder collector function (filling part of the powder is recovered by another pipeline, and can be directly added to the hopper filling again without disinfection, sterilization) | |
| Control System | Variable frequency stepless speed regulation, PLC control | |
| Material | Parts in direct contact with capsules and pharmaceuticals are made of high quality stainless steel | |
){kind=link}